How to schedule a shoot
Two producers can shoot the same script and spend very different money, and most of the difference is the order they shoot it in. The schedule is where a breakdown turns into days, and days are what you pay for. The tool for the job has been the same for a century: the stripboard.
How it usually works
Every scene from the breakdown becomes a strip: a thin card with the scene number, the set, interior or exterior, day or night, the page count in eighths, and the cast in it. The strips are color coded so the board reads at a glance: white for a day interior, yellow for a day exterior, blue for a night interior, green for a night exterior. The first AD lays them out on a board, with a black strip for the end of each day, and starts moving them around.
The first sort is by location, because a company move costs real time. Packing up a set, driving the trucks across town, and setting up again eats half a day, so everything at one location shoots together. The second sort is by cast, so an actor who is in four scenes works them on one day instead of coming in on four. Then the day and night rhythm, because a late night pushes the next morning's call back, and a crew needs its turnaround, usually ten to twelve hours between wrap and the next call.
Then the board meets reality. A location falls through, the lead is only free on certain dates, the weather turns, and the strips come off the board and go back on in a new order. Every move means re-counting the pages in each day and redoing the day out of days, the chart of which actors work on which days, which is what the cast budget is built on.
What a schedule needs
Whatever you build it on, a schedule that will survive the shoot answers these questions:
- The order: scenes grouped by location, then by cast, with as few company moves as you can manage.
- The load: pages per day you can actually shoot. Three to five on a small feature is typical. A dialogue scene in one room goes fast; stunts, kids, animals, and water go slow.
- The rhythm: day and night work in blocks, turnaround respected, a meal break every six hours.
- The weather plan: exteriors early in the shoot, with an interior cover set ready for the day it rains.
- The people: a day out of days for the cast, so you know who is held and who is finished, and nobody is paid to wait.
- The readback: a way to see what a change did to the whole board, not only to the strip you moved.
That last one is where the board goes quiet. It shows you the new order. It does not tell you that day four now runs eleven pages with a company move in the middle.
The same job in Abby
Abby already has the breakdown, so the strips exist before you open the schedule. The board starts as a draft instead of a blank wall:
- Open Schedule. Abby drafts the stripboard from your breakdown: scenes grouped by location, then by cast, day and night kept in blocks, each day timed out from the page count and what is in the scene.
- Move what you know better. Drag strips between days, split a day, add a day. Everything saves as you go, and the pages and hours for each day update under your hand.
- Read the board back. Abby writes a short read of the board as it changes: what runs long, where a company move sits, who is working how many days. When a strip moves, the read moves with it.
- Send it down the line. The call sheet for any day is built from that day's strips, and the budget reads the day count, so a change to the board carries through to both.
The craft stays yours. The order, the pace, the day you give the hardest scene: those are producing decisions, and Abby puts them in front of you with the numbers attached. What she takes off your hands is the counting.
Try it on your production
Abby is free to start, and stripboards are on every plan, no card needed. Upload a script, let her break it down, and open the board.